Pharmaceutical Equipment

Technical and constructive features: 

1. Stainless steel enclosure with a compartment;
2. External metal housing painted in electrostatic field.
3. Supports for sliding trays for good ventilation inside the enclosure
4. Metallic exterior door with closure on silicone rubber gasket; opening in the vertical plane.
5. Recirculation system with fans for the entire premises;
6. Overall dimensions: L = 2150, Depth = 1012, H = 2900 mm;
7. Interior dimensions: 1990 x 1250 x 800 mm
8. Usable capacity: approx. 2 m3;
9. Nominal working temperatures: Tamb + 5 ... 120 oC;
10. Working temperature: 100 oC.
11. Admitted temperature gradient: ± 2 ° C;
12. Maximum homogeneity and precision is obtained in the range of 90 ... 100 oC, under an ambient temperature of 20 oC (± 2 oC);
13. Heat and homogenisation groups located on the rear wall;
14. Electronic main control block with microprocessor and digital display;
15. Supply voltage: 380 V, 50 Hz;
16. Warning on deviation from the programmed temperature by 5oC
17. Max power: 12 k W;
18. Temperature monitoring in the enclosure with three-point measurement on diagonal and local display to have control over the thermostat process.
19. Provided with 56 stainless steel trays (Tray size: 650 x 420 x 45 mm).
20. The trays will be placed on four columns of 14 pieces per column.
21. Exhaust system for excess moisture in the ventilation section of the section.
22. Weight of the oven: approx. 500 kg.

Destination: drying according to the controlled diagram of a quantity of 25 kg of active charcoal powder loaded on stainless steel trays.

Technical and functional features:

• the heating is done according to the controlled diagram;
• programming and digital and optical display of temperature and time parameters;
• programmable temperature range: 50 ... 150 oC;
• useful dimensions: 755 x 880 x 770 mm;
• tray size: 650 x 650 x 40 mm;
• no. total of trays: 8 pieces;
• power supply 400 V / 50 Hz;
• high reliability provided by the materials / subassemblies used:
• KANTHAL resistive material;
• insulation with mineral wool and ceramic fiber;
• microprocessor
• import electronic components;
• the oven is provided with a ventilation system for homogenizing the temperature inside the enclosure;
• the oven is fitted with an exhaust system for vapor elimination;
• the working mode is automatic and the programming of the heating process is done with the help of a programmable controller, directly from its keypad;
• safety in operation (processes are controlled by microprocessor);
• Protection:

                - protection against accidental interruption of power supply (automatic resumption of the process);

                - overtemperature protection;

                - acoustic alarm (signaling) at the end of the cycle;

                - low power consumption.

• Useful volume: 436 dm3;
• Fully automated operation, does not require operator supervision;
• Weight: Approx. 250 Kg.
• Overall dimensions:

                - Length: 915 mm;

                - Depth: 1050 mm;

                - Height: 1170 mm.