Destination: for heat treatment of steel, metals, glass, pottery, welding electrodes.
Models: L 200, L 300, L 600
Technical data:
- Wide capacities range: from 12 to 144litres,
- Wall-mounted KANTHAL heating elements (Sweden),
- RATH ceramic insulation (Austria),
- Upward action parallel link door-keeps hot face away from the operator,
- Equipped with multi PID controller with microprocessor with digital set-and read of temperature, 1 minute to 9999 minutes timer allowing delay of switch-on; an adjustable overtemperature controller is also provided.
- Electrical power supply: 3 phases,380,V, 50 Hz
- Possibility of setting any temperature/time diagram,
- Programmable 40 patterns and 100 steps, 1 step meaning temperature rise speed (max 3250°C/hour), temperature holding in plateau (max 1150°C) or time of temperature holding in plateau (max 9999min)
- Digital display of both set and actual temperature with a 1°C resolution,
- Digital display of time remaining, actual power level,
- Acoustical signal and optical display for status information (stop, prestart, heating, temperature plateau,finalisation of the program);
- "PRE-START" option allows the user to program a delayed start within the interval 00 h 50 min to 99 h 50 min;
- Protection against power supply failure with restart of the process;
- Overheat protection;(with audio and visual warning)
- Protection against accidentally opening the door with automatic switch-off,
- Protection against temperature sensor default, against power element default,
- Warranty period:12 months after putting into operation,
- Service activities provided within the warranty period and afterwards.
- Wall-mounted KANTHAL heating elements (Sweden),
- RATH ceramic insulation (Austria),
- Upward action parallel link door-keeps hot face away from the operator,
- Equipped with multi PID controller with microprocessor with digital set-and read of temperature, 1 minute to 9999 minutes timer allowing delay of switch-on; an adjustable overtemperature controller is also provided.
- Electrical power supply: 3 phases,380,V, 50 Hz
- Possibility of setting any temperature/time diagram,
- Programmable 40 patterns and 100 steps, 1 step meaning temperature rise speed (max 3250°C/hour), temperature holding in plateau (max 1150°C) or time of temperature holding in plateau (max 9999min)
- Digital display of both set and actual temperature with a 1°C resolution,
- Digital display of time remaining, actual power level,
- Acoustical signal and optical display for status information (stop, prestart, heating, temperature plateau,finalisation of the program);
- "PRE-START" option allows the user to program a delayed start within the interval 00 h 50 min to 99 h 50 min;
- Protection against power supply failure with restart of the process;
- Overheat protection;(with audio and visual warning)
- Protection against accidentally opening the door with automatic switch-off,
- Protection against temperature sensor default, against power element default,
- Warranty period:12 months after putting into operation,
- Service activities provided within the warranty period and afterwards.
|
Technical Specifications |
L 200 |
L 300 |
L 600 |
|
Volume |
50 dmc |
100 dmc |
200 dmc |
|
Dimensiones -interior (lxLxH) mm |
200x300x200 |
325x350x250 |
600x600x400 |
|
max. working temperature [oC] |
1.100 |
1.100 |
1.100 |
|
Power supply, at 50 Hz |
380 V |
380 V |
380 V |
|
max.absorbed power, [W] |
5.000 |
6.000 |
24.000 |
Attention :
1. Design and manufacturing upon request, according to user's demands,
2. Choice of controlled atmosphere (vacuum, CO2, N2),
3. Wide range of temperature: from 1100°C to 1700°C,
4. Special purpose furnaces: gold melting furnaces, thermocouples calibration furnaces, kilns for firing decoration (pottery or glass), soldering furnaces, drying furnaces for welding electrodes, tunnel furnaces for testing smoke sensors.
5. Service and modernization activities for the already existing heat treatment equipments in order to improve their performances according to the requests of the new quality standards and to optimize the specific electric energy consumption.
1. Design and manufacturing upon request, according to user's demands,
2. Choice of controlled atmosphere (vacuum, CO2, N2),
3. Wide range of temperature: from 1100°C to 1700°C,
4. Special purpose furnaces: gold melting furnaces, thermocouples calibration furnaces, kilns for firing decoration (pottery or glass), soldering furnaces, drying furnaces for welding electrodes, tunnel furnaces for testing smoke sensors.
5. Service and modernization activities for the already existing heat treatment equipments in order to improve their performances according to the requests of the new quality standards and to optimize the specific electric energy consumption.
